ReliOn BP200W Instruction Manual download pdf (Page 12)

5.3. Fitting the cuff

a) Remove all objects and jewelry (e.g., wrist-

watch) from the wrist in use. Put the cuff

over the wrist with the monitor face on the

inside of the wrist.

b) The distance between the cuff and the

hand should be approx. 10 mm (1/2").

c) Secure the cuff with the hook and loop fas-

tener so that it lies comfortably and not

too tight. No space should remain between

the cuff and the wrist.

d) Support the arm with a small cushion so

that the cuff rests at about the same

height as the heart. Remain still for 2 min-

utes before beginning the measurement.

5.4. Measuring procedure

After the cuff has been appropriately posi-

tioned the measurement can begin:

a) Press the ON/OFF button to begin. After

pressing the ON/OFF button you will hear a

series of short beeps and the pump begins to

inflate the cuff. On the display, the increas-

ing cuff pressure is continually shown.

b) After reaching the proper inflation pres-

sure, the pump stops and the pressure

slowly falls. The cuff pressure is displayed

during the measurement. When the device

has detected the pulse, the heart symbol in

the display begins to blink.

10

Pulse Detected -

Unit measuring

0.5 - 1.0 cm

(¼” - ½”)

M

T

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Comments to this Manuals

No comments